VOOPOO Drag X PnP-X Pod Mod Kit 80W - Product Description

The VOOPOO Drag X PnP-X Pod Mod is the latest addition (knight series) to VOOPOO’s Drag lineup and it holds a 5ml magnetic suction pod couple with two PnP coils of 0.15ohm and 0.3ohm inside. The DRAG X features the all-new GENE.TT Chipset, powered by a Single High-Amp 18650 battery, can attain up to 80W and is equipped with plenty of protections and safeties to ensure a pleasurable and safe vaping experience. Drag X Pnp-X has a special knob-filling on the top, press the semi-hidden button and rotate to the left, and then put out the silicone plug to fill, this design can stem the e-liquid. The DRAG X can change airflow by rotating the pod 180º and reinstalling it with the sturdy magnetic connection. In addition, the DRAG X Pod Kit can be outfitted with a myriad of coils from the Voopoo PnP Coil Series with the intelligent Gene.TT Chipset autodetecting and adjusting the wattage accordingly to prevent burnt coils.

Quick Links:
VOOPOO PNP Replacement Coils
VOOPOO PNP Pod Tank
VOOPOO PNP RTA Pod Tank

VOOPOO Drag X PnP-X Pod Mod Kit Features:

• Gene.TT Chipset
• Dimensions – 127.5 x 32.5 x 28mm
• Powered by a Single High-Amp 18650 Battery
• Wattage Output Range: 5 to 80W
• Voltage Output Range: 3.2-4.2V
• 0.001s Ignition
• Resistance Range: 0.1-3.0ohm
• Original SCORE Ranking Mode
• PCTG Material
• Alloy+Leather Construction
• Intuitive Firing Button
• 0.96 inch TFT Color Screen
• 5mL Refillable Large Leak-Proof Pod
• Side Fill System – Silicone Stoppered
• Compatible with E-Liquid & Nicotine Salts
• VooPoo PnP Coil Series
• 0.15ohm (PnP-VM6), 0.3ohm (PnP-VM1)
• Knob-filling On The Top
• Plug ‘n’ Play Coil Installation
• Innovative Adjustable Airflow System
• Overtime Protection
• Short-Circuit Protection
• Overcharge Protection
• Max Power Protection
• Output Over-Current Protection
• Over-Discharge Protection
• Over Temperature Protection
• Fast Charging Interface
• Battery Reverse Protection
• Type C USB Charge Port

POD Features
Capacity: 5mL
Material: PCTG
Resistance 0.15Ω (PnP-VM6) 0.3Ω (PnP-VM1)

MOD Features
Name: DRAG X PnP-X Kit
Material: Alloy+Leather
Output Power: 5-80W
Resistance: 0.1-3.0Ω
Battery Capacity: Single 18650 (excluding)

What’s Included:

• 1-QTY DRAG X Device
• 1-QTY Voopoo PnP-X Pod(5ml)
• 1-QTY 0.3ohm PnP-VM1 Coil
• 1-QTY 0.15ohm PnP-VM6 Coil
• 1-QTY Type C USB Cable
• 1-QTY Warranty Card
• 1-QTY User Manual

General Tips

• Only use Sony VTC Batteries, Samsung or LG Batteries with your Box Mod. We will not be held responsible for improper use of the mod or any damages that may occur from using this box mod.
• Always use the same brand and model batteries in the mod. For Example use (2) Sony VTC5 18650 batteries or (2) Efest Purple 35A 18650 batteries. DO NOT mix the batteries in your mod. For Example, DO NOT use (1) Sony VTC5 18650 Battery and (1) Efest Purple 35 18650 Battery, damage may occur.
• The batteries used in your mod MUST have the same level of charge, be the same brand, and should be batteries that were purchased together WITHOUT prior and charged together. Failing to follow these steps could result in serious damage to your mod and could cause serious personal injury.
• Always Use Protected Batteries from Reputable Brands Such as Sony, LG, or Samsung. Failure to Use These Batteries Can Result in Explosion and/ or Severe Incorrect Fitment.