Vandy Vape Kylin M AIO 70W Kit - Product Description

The Vandy Vape KYLIN M AIO Pod System gives users the option of using a rebuildable (DIY) or prebuilt dual coil pod design. Also featuring a 5-70W wattage range, and an board temperature control module. Making this the ideal vape for beginners and advanced users. Made out of durable zinc-alloy, the body of the KYLIN M AIO Pod System houses a single high-amp 18650 battery, which powers the device up to 70W. Featuring two different pods options, the KYLIN M AIO offers the option of using either prebuilt replacement coils or a DIY rebuildable coil. The specialized DIY Pod offers a postless clamp style build deck, side secured via Phillips screws and can accommodate mesh sheet coils or handmade coils with a central ceramic cotton support. Furthermore, both pods have side filled eLiquid chambers with the DIY Pod featuring 4 braided stainless steel wires to help facilitate the movement of eJuice up to the build deck. Featuring a slide in pod connection, the KYLIN M AIO Pod System can facilitate either pod.

Quick Links
Vandy Vape Kylin M AIO Replacement Coils

Vandy Vape Kylin M AIO Features

• Dimensions – 101mm by 46mm by 24mm
• Powered by (1) High-Amp 18650 Battery (Sold Seperately)
• Wattage Output Range: 5-70W
• Voltage Output Range: 3.2-4.2V
• Resistance Range: 0.05-3.0ohm
• Temperature Range: 200°-600°F
• Stainless Steel, Nickel, and Titanium Wire Compatibility
• VW Mode
• TC Mode
• Zinc-Alloy Chassis Construction
• Intuitive Firing Button
• 0.49″ OLED Display Screen
• Two Adjustment Buttons
• Slide-In Pod Connection
• Magnetic Battery Door
• PCBA Waterproofing
• Short Circuit Protection
• Open Circuit Protection
• 10s Cutoff Protection
• Over Current Protection
• Over Heating Protection
• Low Battery Warning

Pre-Built Coil Pod Features:

• 2.5mL Refillable Pod Capacity
• Side Fill System – Silicone Stoppered
• Dual Slotted MultiHole Airflow Cap
• Vandy Vape Kylin M AIO Coil Series
• 0.3Ω KYLIN M AIO Coil – Rated for 35-45W
• Threaded Coil Airflow Adapter
• Press-Fit Coil Installation
• Slide-In Pod Connection

Rebuildable (DIY) Pod Features:

• 5.0mL Refillable Pod Capacity
• Side Fill System – Silicone Stoppered
• Conical Flavor Chamber Top Cap
• Dual Slotted MultiHole Airflow Cap
• Postless Clamp Style Build Deck
• Side Secured via Phillips Screws
• PEEK Insulator
• 4 Braided Stainless Steel Wicking Rods
• Spring Loaded Ceramic Cotton Support
• Compatible with Vandy Vape M Sheet Coils
• Slide-In Pod Connection

What’s Included

• 1-Qty KYLIN M AIO Device
• 1-Qty DIY Pod
• 1-Qty Prebuilt Coil Pod
• 1-Qty 0.2ohm A1 M Sheet Coil
• 1-Qty 0.15ohm Dual M Sheet Coil
• 1-Qty 0.15ohm Ni80 M Sheet Coil
• 1-Qty 0.15ohm SS316L M Sheet Coil
• 1-Qty QC Type-C Cable
• 1-Qty 0.3ohm Kylin M AIO Coil
• 1-Qty 0.23ohm Triple Fused Clapton Coil
• 1-Qty Wire Heating Tool
• 1-Qty M Sheet Coil Rod
• 1-Qty Lead Guide
• 2-Qty Cotton Lace
• 1-Qty Accessory Bag
• 5-Qty Braided Steel Wires
• 1-Qty User Manual
• Accessory Bag
• Authenticity Code on Retail Box

General Tips

• Only use Sony VTC Batteries, Samsung or LG Batteries with your Box Mod. We will not be held responsible for improper use of the mod or any damages that may occur from using this box mod.
• Always use the same brand and model batteries in the mod. For Example use (2) Sony VTC5 18650 batteries or (2) Efest Purple 35A 18650 batteries. DO NOT mix the batteries in your mod. For Example DO NOT use (1) Sony VTC5 18650 Battery and (1) Efest Purple 35 18650 Battery, damage may occur.
• The batteries used in your mod MUST have the same level of charge, be the same brand and should be batteries that were purchased together WITHOUT prior and charged together. Failing to follow these steps could result in serious damage to your mod and could cause serious personal injury.
• Always Use Protected Batteries from Reputable Brands Such as Sony, LG or Samsung. Failure to Use These Batteries Can Result in Explosion and/ or Severe Incorrect Fitment.